top of page
bgImage

Depositor Products

2" Billet Stainless Steel Depositor Cylinder 

OEM depositor cylinders are a two-piece assembly consisting of an aluminum housing and stainless steel bore. These cylinders are fragile. A dropped OEM cylinder is a damaged cylinder. The aluminum becomes pitted and scarred making it hard to clean. Sharp edges develop on the aluminum cutting hands and gloves. Repeated washing cycles crack the aluminum from thermal expansion.


Lanco Precision cylinders fix all of these problems. Our cylinders are precision CNC machined from a single piece high quality domestic T304 stainless steel. No aluminum to become damaged. No cracking. No sharp edges. No wear. You will never have to replace another cylinder from damage when you switch to Lanco. 


[CLICK FOR DETAILS]


Made in the U.S.A.    [p/n: L15047]

2-1/4" Billet Stainless Steel Depositor Cylinder 

All of the same great features of our 2" cylinder but with a bigger 2-1/4" bore.


Don't let the OEM aluminum cylinders failures keep hurting your production. Lanco cylinders are the last cylinders you'll ever need to buy.  


Made in the U.S.A.    [p/n: L17011]

Billet Stainless Cylinder Clamp

OEM cylinder clamps, just like the cylinders, are composed of aluminum and stainless steel. The body of the clamp is cast aluminum with a stainless threaded insert pressed into it. These clamps are fragile. Dropping the clamp on the floor often results in broken clamp fingers, cracking near the thumbscrew, and surface damage to the aluminum. The aluminum becomes pitted and scarred making it hard to clean. Sharp edges develop on the aluminum cutting hands and gloves. Repeated washing cycles loosen the threaded insert from the clamp's body.


Lanco Precision cylinder clamps fix all of these problems. Like our cylinders we machine the clamp body from a single solid piece of high quality domestic T304 stainless steel. No aluminum to become damaged. No cracking. No sharp edges. No wear. Why keep replacing your clamps from wear and damage? A Lanco clamp is the last one you'll ever need.


Replaces Belshaw MD-0505 & MD-0505A

Made in the U.S.A.    [p/n: L18020]

2" Depositor Cylinder Holder

What do you do with your depositor cylinders when you pull them off the basin? Keep your cylinders safe and accounted for by placing them on our cylinder holder. 


Our cylinder holder securely holds six cylinders. No drilling or modifications are required to your depositor's frame. Our holder clamps to the depositor's frame. 


Made in the U.S.A.    [p/n: L16070]

2" Depositor O-Rings

The o-ring on your plungers is a vital part of product safety and longevity of your plungers and cylinder. The o-rings should be replaced frequently. 


Lanco offers plunger o-rings packaged in any quantity. Do you have a PM schedule? Lanco can package and ship to you on a scheduled to ensure you're never out of stock. 


O-rings are delivered in easily resealable screw-top FDA complient bucket and date stamped. 


Made in the U.S.A.    [p/n: L15020]

Depositor Cylinder Plug

Has your OEM depositor plug seen better days? The OEM's aluminum plug has the same problem as their cylinder; the material. The aluminum plug is damaged if dropped. Now your left with sharp aluminum edges and poor surface finish that doesn't clean well. 


Lanco's plug fixes this problem. Our plugs are machined from virgin acetal Delrin plastic. No sharp edges, easy to clean, and no damage if dropped. 


Made in the U.S.A.   [p/n: L17008]

Actuator Arm (Clutch Pawl)

Why replace the entire actuator arm assembly if your pawl's shaft is still good? The OEM does not give you that option; but Lanco does. 


Lanco offers strong billet stainless steel replacement pawls for your Belshaw depositors. Stop paying for parts you don't need. 


Replaces Belshaw MDD-0472

Made in the U.S.A.   [p/n: L16069]

bgImage

Don't see something you need? Contact us!

(847) 508-6774   Sales@LancoPrecision.com

bottom of page